©2018 by MSRacing. 

10R80 BUILDS

  • Replacement of all clutches and steels with McLeod / Raybestos High Performance Replacements that increase the holding capacity.

  • A full disassembly and cleaning of the gearbox.

  •  Visual inspection of all internal components  gears, drums and bearings. 

  • Air test all shift elements. 

  • Cleaning of the electro-hydraulic valve body.

  • Clutch pack heights and clearance will be set to specification.

  • Tail shaft end play and input shaft end float will be checked and adjusted.

  • During the build, if any parts fail testing or inspection, you will be notified with an additional estimate to replace failed parts. 

STARTING AT $1700